Frame - Mud Protection Archives - Urban Bike Society

Velocity Hucking Systems VHS 3.0 Slapper Tape Chainstay Guard – Black

ordermaster — Fri, 27 Sep 2024 08:51:55 +0000

Urban Bike Society - Bikeservice.gr

Velocity Hucking Systems VHS 3.0 Slapper Tape Chainstay Guard – black
Wider, softer, stronger – this is the third generation of the popular VHS Slapper Tape!

The VHS 3.0 comes with an improved design, optimized materials, improved adhesives and a new iconic packaging.

A major improvement over the 2.0 tape is the increased footprint from 70mm to 140mm. This eliminates any exposed edges that could catch on shoes.

The improvements at a glance:
Wider base area of 140mm (encloses the entire chain stay)
softer, moldable silicone rubber that can be perfectly adapted to the shape of the frame
flatter, beveled and softer knobs that dissipate and absorb chain impacts in a targeted manner
new, user-friendly adhesive
Kiss-cut process for easier application of the tape
UV-resistant

Dimensions:

Length – 350 mm
width – 140mm
Height – 10 mm

Installation

Remove your existing chainstay protector (including a protective film).
Clean the chainstay thoroughly to remove dirt and old adhesive.
Then wash with isopropyl alcohol to get everything sparkling clean. Avoid using household cleaners, as these often contain silicone, which prevents the adhesive from sticking.
Test the length of the VHS tape and cut it to size if necessary.
Peel off the middle backing film, align the tape and press it evenly onto the frame. Then tape the other two sides one after the other to ensure a clean result.
Let it cure for at least 30 minutes before riding, up to 6 hours in humid conditions.
Leftover pieces can be used for other small areas.

Already used and loved by some of the fastest racers in the world, VHS 3.0 tape is the ultimate noise dampening for your mountain bike.

The post Velocity Hucking Systems VHS 3.0 Slapper Tape Chainstay Guard – Black appeared first on Urban Bike Society.

AMS X PUMP FOR PEACE FRAME GUARD EXTRA WHITE

ordermaster — Fri, 10 May 2024 17:12:58 +0000

Urban Bike Society - Bikeservice.gr

Building pump tracks in underprivileged communities. AMS X Pump for Peace Frame Guard Extra

AMS joins forces with Velo Solutions Pump for Peace, for this exclusive and limited edition design.

Choose between the clear with black or white lines options.

Benefits:

Get rid of frame chips and cable wear on the frame.
Don’t ruin the look of your bike. Improve it.
Super easy to install, even on the most difficult curves.
Will last longer than your bike.
Designed for universal fitting.
This option is ideal for Trail, All Mountain, Enduro, Freeride and DH bikes.

Specifications:

High impact and rub resistance honeycomb 380 microns semi-rigid PVC.
Minimum weight (28 grams / 0.98 ounces)
Cool look&feel honeycomb material.
Easy to install.
Automotive-grade materials. Won’t yellow over time. Guaranteed.
10 parts for a universal protection system: 1 big part for the down tube; 4 arrow parts for extending the down tube protection or top tube, 4 parts for the chainstay; 1 rectangle for cable wear protection or other uses.

The post AMS X PUMP FOR PEACE FRAME GUARD EXTRA WHITE appeared first on Urban Bike Society.

Enduro – DH Long mudguard – Grizzly

ordermaster — Fri, 16 Feb 2024 09:58:23 +0000

Urban Bike Society - Bikeservice.gr

DESCRIPTION
Light, trendy and useful, the Slicy Enduro / DH Long mudguard will help you to protect your face from mud and water projections. Ideal to improve your riding skills and keeping the style in any circumstances. Our new Enduro / DH Long mudguard has been developed with the ambassadors of the Slicy Family. We add an extra front and rear face to ensure maximum protection from tyre spray and flying debris. It also protect your fork stanchions, seals and bridge.

No more full black, soulless mudguard. Thanks to his unique style, The Slicy Enduro / DH Long mudguard will allow you to not stay unnoticed! There will always be a model or a color which fits your bike in our range! If not, you will be able to create your own mudguard, thanks to the MySlicy online customization. And you know what? There is no minimum item amount required!

The Slicy Enduro / DH Long mudguard fits on most of the forks : All Mountain, Enduro, Freeride and Down Hill bikes, on 26, 27.5 and 29 inches.

Compatibility:

– Wheels size : 26″ 27.5″ 27.5″ PLUS, 29″ et 29″ PLUS
– Tyres width : 2.3″ à 3.0″
– Forks : Boost et Non-Boost

Features:
– Fast setup with 4 cable ties (included)
– Made in France
– Digital printing
– Numeric cutting
– Largely made of recyclable Polypropylene
– 45gr
– Width: 27.5 cm
– Length: 35.3 cm

The post Enduro – DH Long mudguard – Grizzly appeared first on Urban Bike Society.

Enduro – DH Long mudguard – Safari

ordermaster — Fri, 16 Feb 2024 09:55:19 +0000

Urban Bike Society - Bikeservice.gr

The Slicy Enduro / DH Long mudguard fits on most of the forks : All Mountain, Enduro, Freeride and Down Hill bikes, on 26, 27.5 and 29 inches.

Compatibility:

– Wheels size : 26″ 27.5″ 27.5″ PLUS, 29″ et 29″ PLUS
– Tyres width : 2.3″ à 3.0″
– Forks : Boost et Non-Boost

The post Enduro – DH Long mudguard – Safari appeared first on Urban Bike Society.

Enduro – DH Long mudguard – Sweet Dreams

ordermaster — Fri, 16 Feb 2024 09:40:27 +0000

Urban Bike Society - Bikeservice.gr

The Slicy Enduro / DH Long mudguard fits on most of the forks : All Mountain, Enduro, Freeride and Down Hill bikes, on 26, 27.5 and 29 inches.

Compatibility:

– Wheels size : 26″ 27.5″ 27.5″ PLUS, 29″ et 29″ PLUS
– Tyres width : 2.3″ à 3.0″
– Forks : Boost et Non-Boost

The post Enduro – DH Long mudguard – Sweet Dreams appeared first on Urban Bike Society.

Syncros Trail 2 Fender for FOX 36/38 Forks

ordermaster — Thu, 09 Nov 2023 11:26:03 +0000

Urban Bike Society - Bikeservice.gr

Syncros Trail 2 Fender for FOX 36/38 Forks

The Syncros Trail 2 fender is especially developed for the suspension forks of the FOX 34 series and is simply attached to fork crown and bleed points using screws. It not only integrates elegantly into the front section, but also offers excellent protection against mud as well as high durability combined with low weight.

Technical details of the Syncros Trail 2 mudguard

range of use: MTB
material: plastic
mounting: screwed
dimensions: 261 x 164 mm
weight: approx. 63 g (manufacturer’s specification)

Scope of supply:

mudguard incl. bolts and tool

SKU:288339-0001222

EAN:7615523369515

EAN2:192820631912

The post Syncros Trail 2 Fender for FOX 36/38 Forks appeared first on Urban Bike Society.

Universal bike crank protection – Sublimistick Crank

ordermaster — Wed, 12 Apr 2023 15:10:53 +0000

Urban Bike Society - Bikeservice.gr

DESCRIPTION

Real beauty treatment for bikes, the Sublimistick Crank is our new Universal bike crank protection. It provide longevity and brightness to your cranks.

Completely universal and flexible, it perfectly fit to any kind of crank.

Our Sublimistick Crank is compatible with :

Shimano (XT/XTR)
Praxis
E-thirteen
Sram
Quarq
Race Face
FSA without power sensor
Rotor (Inspider Vegast / Kapic)
Truvativ

Some brands are not compatible :

Rotor
Hope
Shimano Deore
Race Face Altas
E-thirteen LG 1

Crank sizes : 165mm – 175mm

Features :

Thickness : 160 micron
UV protection
Non-yellowing
Self-healing property
Anti-adherent, Self-cleaning

INSTALLATION

The installation of a Sublimistick protection kit requires calm and thoroughness. If you are not sure of your skills, we invite you to contact your nearest Slicy dealer for a perfect set-up. Find our dealers HERE

Preparation :

– Make sure you are in a clean and warm, indoor space (17°C to 27°C).
– Clean and degrease your bike paying close attention to every little detail.
– Remove inconvenient components or old decals to facilitate the installation.
– Ensure the bike has been allowed to dry for some hours.
– Fill the spray bottle with our install shampoo. Add 0.5ml for 0.5L of warm water.
– Thoroughly wash your hands.

Installation :

– Identify Sublimistick sections using the bike diagram.
– Spray water to your fingers.
– Peel the section of Sublimistick off and spray water immediately on the sticky side.
– Spray water on the frame’s location.
– Apply the wet Sublimistick section to the frame. Center and line up the piece according to the diagram.
– Repositionining is possible if the Sublimistick section is still wet.
To move, peel back, add further water to the frame and Sublimistick section then re-apply in correct location.
– Use the Slicy squeegee to remove water and air. Start at the centre of the Sublimistick section and pull the water and air to the outside.
– Use a microfiber to collect any excess water.
– Wait few minutes and use your fingers to check if all edges are firmly pressed down.
– For a perfect finish, use the hair dryer to dry the Sublimistick sections. Do not overheat.
– Repeat these steps for each section of Sublimistick.
– Kits are designed with a 1 mm gap between Sublimistick sections.
– Let your bike dry in a warm workspace for 24h.
– Do not ride or wash your bike for 24h.

Removal :

– Use a hair dryer to heat the adhesive.
– Peel back a corner and remove remove the section very slowly.

Disclaimers :

– Slicy is not responisble for any damage caused to your bike during installation or removal of the Sublimistick Integral Kit.
– If you have any problems or issues with your Sublimistick Integral Kit, please contact a member of our team at: contact@slicy-products.com.

The post Universal bike crank protection – Sublimistick Crank appeared first on Urban Bike Society.

Universal bike fork protection – Sublimistick Fork by Slicy

ordermaster — Wed, 12 Apr 2023 15:02:16 +0000

Urban Bike Society - Bikeservice.gr

DESCRIPTION

Real beauty treatment for bikes, the Sublimistick Fork is our new Universal bike fork protection for MTB. It provide longevity and brightness to your bike.

Completely universal and flexible, it perfectly fits most forks brands and models.

Some compatible fork brands:

Cane Creek
DT Swiss
DVO
Fox Racing Shox
Manitou
Marzocchi
RockShox
SR Suntour
…

Features :

Thickness : 160 micron
UV protection
Non-yellowing
Self-healing property
Anti-adherent

INSTALLATION

The installation of a Sublimistick Fork protection requires calm and thoroughness. If you are not sure of your skills, we invite you to contact your nearest Slicy dealer for a perfect set-up.

Preparation :

– Make sure you are in a clean and warm, indoor space (17°C to 27°C).
– Clean and degrease your fork paying close attention to every little detail.
– Remove inconvenient components or old decals to facilitate the installation.
– Ensure the bike has been allowed to dry for some hours.
– Fill the spray bottle with our install shampoo. Add 0.5ml for 0.5L of warm water.
– Thoroughly wash your hands.

Installation :

– Identify Sublimistick sections using the bike diagram.
– Spray water to your fingers.
– Peel the section of Sublimistick off and spray water immediately on the sticky side.
– Spray water on the frame’s location.
– Apply the wet Sublimistick section to the fork. Center and line up the piece according to the diagram.
– Repositionining is possible if the Sublimistick section is still wet.
To move, peel back, add further water to the fork and Sublimistick section then re-apply in correct location.
– Use the Slicy squeegee to remove water and air. Start at the centre of the Sublimistick section and pull the water and air to the outside.
– Use a microfiber to collect any excess water.
– Wait few minutes and use your fingers to check if all edges are firmly pressed down.
– For a perfect finish, use the hair dryer to dry the Sublimistick sections. Do not overheat.
– Repeat these steps for each section of Sublimistick.
– Let your bike dry in a warm workspace for 24h.
– Do not ride or wash your bike for 24h.

Removal :

– Use a hair dryer to heat the adhesive.
– Peel back a corner and remove remove the section very slowly.

Disclaimers :

– Slicy is not responsible for any damage caused to your bike during installation or removal of the Sublimistick kit.
– If you have any problems or issues with your Sublimistick Fork Kit, please contact a member of our team at: contact@slicy-products.com.

The post Universal bike fork protection – Sublimistick Fork by Slicy appeared first on Urban Bike Society.

Syncros Trail DH Fender 49

shopmaster — Tue, 24 Jan 2023 14:45:34 +0000

Urban Bike Society - Bikeservice.gr

Much like our regular Trail fenders, the DH fender integrates perfectly with a Fox 49 fork to offer the perfect solution for when trail conditions are of the wet kind. Fully customizable, you can mount the full set, (extending either side of the fork) or the rear part only depending on riding conditions. Our solution is screwed securely into the bridge, no need for zipties for the ultimate clean look. Fully compatible with both FOX 40 / 27″ and FOX49 / 29″ wheel size thanks to 2 sets of mounting holes.

MATERIAL:High impact resistant Composite
DIMENSIONS:250mm
WEIGHT:107g approx., hardware included
FEATURES:Designed for FOX® 40 and 49 forks

Optimized fit through two screws on fork arch
Can be mounted as single rear or front + rear parts
Highest level of integration, durability and protection from mud

Model : 275494

KEY FEATURES
Fox 40 and 49 compatible
Utilizes screw mounts, no zip ties
Front, rear or both parts
COLOR : black

The post Syncros Trail DH Fender 49 appeared first on Urban Bike Society.

Fox Racing Float 36 / 38 XL Mud Guard

ordermaster — Mon, 27 Dec 2021 11:13:13 +0000

Urban Bike Society - Bikeservice.gr

Float 36 / 38 XL Mud Guard

This mud guard is a must have for all bikers who ride the current Fox Racing 36 Float or 38 Float suspension fork.

Compatibility – Fox Racing Float 36 / 38 XL Mud Guard

Only suitable for Fox Racing Float 36 or Float 38 from model year 2021+

Material

Plastic

Color

black

Scope of delivery

1 x Fox Racing Float 36 / 38XL Mud Guard

Manufacturer item no.: 803-01-751
EAN: 0821973426471
UPC: 821973426471

The post Fox Racing Float 36 / 38 XL Mud Guard appeared first on Urban Bike Society.